*FREE SHIPPING TO ANY PART OF THE MEXICAN REPUBLIC*
IMPECCABLE HIGH HORN QUALITY NEW SERIES TRUE SOUND 1000 WATS
REAL, PRODUCT IN SEALED BOX FREE SHIPPING, VAT ELECTRONIC INVOICE AND WARRANTY, AS A GIFT INCLUDES SPECIAL CASE OF THE BRAND WITH COMPARTMENTS TO BE USED WITH EVERYTHING AND COVER FOR PROTECTION OR GOOD FOR TRAVEL
**************************************************** **************************************************** *******
INCLUDES:
01 ALTO TS 312 HORN IN SEALED BOX
01 POWER CABLE
01 HIGH COVER
FREE AND IMMEDIATE SHIPPING IF YOUR PAYMENT ENTERS BEFORE 12:00
**************************************************** **************************************************** *****
TS312
2000 WATT 12-INCH 2-WAY AUTOMATIC SPEAKER
2000 W Peak (1300 LF + 700 HF) 1000 W RMS Continuous (650 LF + 350 HF)
12-inch (305mm) LF driver, 3-inch (76mm) high-temperature voice coil
1.4-inch (35mm) neodymium magnet HF driver with precision waveguide
High-quality, lightweight cabinet design for easy transport, setup and installation
Pole mount, wedge monitor, bracket installation or suspended application with integral M10 suspension points
Integrated 2-channel mixer with two 1/4-inch XLR combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch, and Ground-Lift switch
Custom-engineered, high-efficiency Class-D amplifiers with passive cooling design – fanless means the speaker runs cleaner, quieter, and has greater long-term reliability
Design Origin: Designed and tuned in the USA.

















Truesonic TS3 by Alto Professional:
Exceeded expectations.
The new Alto Professional Truesonic TS3 series does everything you demand in a family of uncompromising professional loudspeakers. These speakers solve all of your performance and installation challenges. They are high-performance in every way: their new transducers and amplifiers allow them to play extremely loud and clear, without compromise or restriction. And they're "high performance" from a concept and manufacturing standpoint: we made sure every aspect of their design exceeded what it had to do. The end result is loudspeakers that achieve a level of excellence and refinement that defies expectations. Defy your expectations.
There are four models in the new TS3 range: TS308, TS310, TS312 and TS315, with 8, 10, 12 and 15-inch woofers respectively. The range shares a new 2000 watt peak (1000 watt continuous) amplifier, a significant advance over the 1100 watt peak (550 watt continuous) amplifiers in the TS2.
All four models feature all-new low-frequency drivers, designed to play louder and handle more power than their already impressive predecessors, the highly successful TS2 series. They also have a new horn loaded high frequency driver. This impressive transducer has an all-new heat sink design that provides exceptional heat dissipation for impressive power handling, even at all-night concert levels. Because these new drivers can safely handle the added power, the TS3s take full advantage of the increased wattage and will reproduce higher SPLs with less distortion.
We've even made the TS3 easier to use, with an updated control panel and clearer control prompts and detents that make setup faster and more accurate.
2000 watts of bi-amped power, newly designed drivers and easier, more satisfying controls and setup - the new TS3 range doesn't just meet your requirements. It makes you rethink what is possible.
TECHNICAL INFORMATION
Output Power: 2000 W Peak (1300 LF + 700 HF) 1000 W RMS Continuous (650 LF + 350 HF)
LF Driver: 12-inch (305mm) LF driver, 3-inch (76mm) high-temperature voice coil
HF Driver: 1.4-inch (35mm) neodymium magnet HF driver with precision waveguide
Crossover: 2kHz
Maximum SPL: 131 dB peak, 128 dB continuous (dB SPL @ 1m)
Frequency response: 53 Hz – 20 kHz (+/- 3 dB)
Frequency range: 46 Hz – 22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Low and High Frequency Contour Switch +3dB Boost
Connectors: (2) 1/4” (6.35mm) XLR/TRS combo inputs, (1) XLR link output, (1) IEC power cord input
Controls: (2) Volume, On/Off Switch, Contour Switch, Ground-Lift Switch
Indicators: 2 x Power LEDs (front and rear), Clip Limiter LEDs
Protection: electronic clip, transducer thermal and overdrive protection
Power connection: IEC with mains fuse
AC voltage input: 100,110-120,220–240 V, 50/60 Hz
Case: Trapezoidal, injection molded, polypropylene case with perforated steel grill
Mounting/Installation: Standard 36mm pole mount, wall or ceiling mount with TSB125 bracket, suspended application with integral M10 suspension points, wedge monitor
Dimensions: (H x W x D): 23.8” x 13.9” x 13.8” / 605mm x 354mm x 350mm
Net Weight: 35.9 lbs. / 16.3kg.
Design Origin: Designed and tuned in the USA.
Accessories: TSB125 bracket, TS212 cover